E3D RapidChange Revo™ Nozzle Triple Packs (1 x 0.25mm, 0.6mm & 0.8mm Brass Nozzles)

E3d Rapidchange Revo™ Brass 1.75 Mm Variety Pack 3d Printer Nozzle. EU Plug.Experiment freely.With nozzle swapping this easy, you´re free to experiment with nozzle sizes you might not have used before.Set your 3D printer up for ultra-fine or ultra-thick extrusion widths in no time.Print large objects in less time or tiny objects with high resolution.Frustration-free Each Revo Nozzle is a preassembled nozzle and Heat Break in one unit, so there´s no hazardous hot tightening and no chance of incorrect assembly.Say goodbye to frustrating Hot end leaks and enjoy reliable FDM 3D printing.Rapid identification.Identify nozzle sizes at a glance, thanks to a colour-coded silicone sock.Plus, each Revo Nozzle has its size engraved into it with easy-to-read numbers, so there are no confusing identification markers to learn.Note:- Revo™ Nozzles are not compatible with V6-style heater blocks.- You may need to adjust your Z offset when changing nozzles.Warning:- This product can expose you to chemicals including Mineral Oils, which is known to the State of California to cause cancer, and Lead and Nickel, which are known to the State of California to cause cancer and birth defects or other reproductive harm.Specifications:Brass:- Input diameter:1.75mm.- Maximum temperature:300°C. tradeinn Techinn

With this E3D Revo nozzle pack you'll receive 3 Revo nozzles, with the diameters 0.25mm (yellow), 0.6mm (blue) and 0.8mm (green).These brass nozzles for 1.75mm filament are suitable for the E3D RapidChange Revo system. With this system you can quickly and easily adjust your nozzle diameter at room temperature. You can easily change them without using extra tools.Because each Revo nozzle diameter has its own colour, you can quickly see which nozzle diameter you have in the hotend.