Faithfull FAI2303MDC Metal Cutting Disc Depressed Centre 230 x 3.2 22.23mm

Depressed Centre Metal Cutting Discs are manufactured using Aluminium Oxide abrasive grit with fibreglass reinforcing and resin bonded to provide both safety and optimum cutting performance. Discs with a 1.8mm thickness permit fine cutting where necessary on stainless steel and high grade metals. They have been developed to make angle grinders more versatile in use by allowing better access in some applications. Metal cutting discs must always be presented to the workpiece at an angle of 90º. For use with a variety of machines mini-grinders to stationary cutting-off machines. It is important to choose between a metal or stone cutting disc according to the material being cut and to ensure that the correct wheel is properly mounted. Manufactured to EN 12413 standard. SAFETY TIPS Read the manufacturer's instructions carefullyWear goggles to guard against flying chips or dustInspect the condition of the wheel frequentlyAdjust the guard to deflect sparks and dustMaintain the revs and let the wheel do the workDon't use Depressed Centre cutting discs as grinding wheels1 x Faithfull Depressed Centre Metal Cutting Disc 230 x 3.2 x 22.23mmPTDFAI2303MDC

General description This depressed centre metal cutting disc is designed for cutting metal materials such as stainless steel and high-grade metals. Made with aluminium oxide abrasive grit, it features fibreglass reinforcement and resin bonding for safety and optimal performance. The disc has a diameter of 230mm and a bore of 22.23mm, with a thickness of 1.8mm, allowing for precise and fine cuts. It is suitable for use with various machines, from mini-grinders to stationary cutting-off machines. Technical specifications Diameter: 230mm Bore: 22.23mm Thickness: 1.8mm Type: Depressed Centre Manufacturer Part Number: FAI2303MDC Installation Mount the disc securely onto the machine's spindle. Ensure the disc is properly aligned and tightened. Adjust the safety guard to deflect sparks and dust. Usage Use at a 90-degree angle to the workpiece for effective cutting. Maintain the recommended rotational speed. Wear safety goggles to protect against flying chips and dust. Inspect the disc