Fischer 545676 Cavity Fixing, Duoblade S Ld, Self Drilling Plasterboard Plug with Chipboard Screw, Strong for Fast and Easy Installation, Metal Tip, Grey, Red,

Amazon

Quick & easy installation: The self-drilling DuoBlade is an innovative plug for fixing light loads to gypsum plasterboard and gypsum fibre boards – The screws included are perfectly matched to the plugs and since no special setting device or pre-drilling is necessary, you save time and money. Multi-component technology ensures strong performance: With its sharp metal tip, the plug can be applied precisely, allowing a clean and effective drilling procedure as well as a safe installation without the plastic plug spinning away or the plates breaking. Feelgood-factor: The self-tapping thread ensures a perfect form fit, the anti-rotation lock prevents the plug from spinning in the drill hole and the additional expansion provides an absolutely secure hold of the plug. Areas of application: The self-drilling plug is suitable for fixing light loads such as smoke detectors, mirrors, curtain rods, blinds, ceiling lights and picture frames with screws Ø 4 - 5 mm to plasterboard, gypsum fibre board as well as lightweight cement board. Scope of delivery: 25 x DuoBlade S LD self-drilling plasterboard plug + 25 x chipboard screw (4,5 x 40) (item no. 545676) by fischer., Weight: 0.3527396192 Pounds, Manufacturer: fischer

Zoro Tools

The fischer DuoBlade is part of the innovative DuoLine and therefore consists of different components, which enable the best possible performance. The self-drilling tip allows a clean and effective drilling procedure. The fixing is screwed in the pre-positioned installation with the (cordless) screwdriver setting tool flush to the surface of the gypsum plasterboard. The fischer DuoBlade is adapted for wood, metal and chipboard screws from 4 to 5 mm thickness as well as different hooks and eye screws. Consequently, it is universally suitable for fixing e.g. smoke detectors, curtain rods and shutters securely and quickly. The DuoBlade is placed in the plasterboard with a conventional PZ 2 drive. No special setting device is required. *Self-drilling plasterboard plug for fast and easy installation *Anti rotation lock prevents from spinning in the drill hole *Use of commercially available hooks, screws and eyelets *PZ2 drive - same drive for plug and screw *Centering point for precise positioning of the anchor *Optimum hold with appropriate chipboard screw