HALJIA 3Pcs DRV8833 1.5A 2 Channel H Bridge DC Gear Motor Driver Module Board Compatible with 3D Printer Arduino
Prices from
6.99
Featured
|
£ 6.99 |
To Shop
|
|
£ 6.99 |
To Shop
|
| COMPARE ALL WEBSHOPS (2) | ||
Description
Amazon
The motor driver can control up to two DC motors at a constant current of 1.0A (4A peak). Two input signals (IN1 and IN2) can be used to control the motor in one of four function modes - CW, CCW, short-brake, and stop. The two motor outputs (A and B) can be separately controlled, the speed of each motor is controlled via a PWM input signal with a frequency up to 100kHz. Power supply voltage: VM = 2.7-10.8V Output current: Iout=1.0A(average) / 4A (peak)
Description
(1)
The motor driver can control up to two DC motors at a constant current of 1.0A (4A peak). Two input signals (IN1 and IN2) can be used to control the motor in one of four function modes - CW, CCW, short-brake, and stop. The two motor outputs (A and B) can be separately controlled, the speed of each motor is controlled via a PWM input signal with a frequency up to 100kHz. Power supply voltage: VM = 2.7-10.8V Output current: Iout=1.0A(average) / 4A (peak)
Product specifications
Related results
Featured Choice
£ 6.99
