HSS86 Hybrid Servo Driver + NEMA34 Closed Loop High Speed Stepper Motor 4N.M 0 3000RPM for All Kinds of Machinery Load Conditions

HYBRID STEPPER MOTOR SERVO DRIVER: HSS86 is a two-phase hybrid stepper motor servo driver, adopting new 32-bIt control technology and vector control technology that can prevent loss of movement synchronization and ensures accuracy. High-speed attenuation is far lower than the traditional open-loop driver, which can greatly increase high - speed performance and of stepper motor. GOOD REPLACEMENT : The driver is a great replacement for traditional open loop stepping driver and can replace part of traditional AC servo system. Load-based current control technology can effectively reduce temperature rise of motor and prolong motor service life. Built-in position and alarm output is convenient for PC monitoring and controlling. Position out-of-tolerance alarm function ensures machining equipment safe ADVANTAGE: Stepping closed-loop circuit system, no loss of movement synchronization. Improve motor output and speed. Current is adjusted depending on the load, reducing motor temperature rise. Zero speed static ability of no vibration after completion of positioning. Maximum 51200 steps/rotation, 16 kinds of optional segment. ADOPTED HIGH CONTROL TECHNOLOGY: The driver uses advanced 32-bit special motor control chip and vector closed-loop control technology. Fit for all kinds of machinery load conditions (including low rigidity belt wheel and pulley) without adjusting the gain parameters. PRACTICAL AND Motor runs smoothly, vibrates mildly, and improves acceleration and deceleration dynamic performance. It supports over current protection, over voltage protection, position out-of-tolerance