J Roller by Peachtree Woodworking PW2212

Applying veneer, laminate or even wall coverings usually requires some tools that you may not find in your neighborhood big box store or even at a local mom and pop hardware store. The Fulton J Roller is one of those items and is the ideal tool for applying pressure to your sheet or paper goods to ensure proper adhesion to your work surface. When applying veneer on wood for example, you generally need to exert a good amount of even downward pressure on the veneer sheet or roll. To do this, we could use a flat bar of some sort, but that generally won't be even enough and can't get into the slight undulations of the wood surface. The Fulton J Roller is the perfect width to properly work the veneer for proper adhesion. A full 12" long, the J Roller is the perfect length to handle most any project where you need to apply sheet goods to another surface. The roller is made from a firm, non marring, textured rubber material that helps you apply pressure where it is needed. The roller wall is about 3/8" thick so it will stand up to the rigorous chore of applying pressure to your sheet goods. Using the Fulton J Roller gives you the ability to evenly apply pressure to your veneer, laminates and wall coverings to provide maximum adhesion. Perfect for working many of those project types around the house or in your woodworking shop. The roller measures approximately 2 7/8" wide. International products have separate terms, are sold from abroad and may differ from local products, including fit, age ratings, and language of product, labeling or instructions., Manufacturer: Peachtree Woodworking