KIWIVIC 48W Dimmable LED Ceiling Lights with Remote, Living Room Bedroom Office Kitchen, Ø50cm, Black

[Ultra -thin design ceiling light] - With its 2.5 cm slim design, this led ceiling light fits perfectly with various decorative style. Power: 48W, size: 50*2.5cm, color temperature: 3000K-6000K. The bedroom lights ceiling can help reduce energy consumption and save 85% of the electricity costs. [Pairing of the remote control] - If the remote control does not work, this may be due to a pairing error. The method of repairing codes is: Long pressed the upper left button within 5s after switching on the power Source (if you see the light flashing, it shows that the code is right). [Ceiling lights with memory function] - The remote of the ceiling lights living room always save the last setting. Turn on the lamp with the wall switch for at least 15 seconds and then turn off for 5 seconds to save the setting. Note: Settings cannot be saved when the light switched on and off quickly. [Brightness & color temperature adjustable]- The color temperature (3000K-6000K) and the brightness (10%-100%) can be set by remote control. In addition, the color temperature (warm light/neutral light/white light) of the kitchen lights ceiling can also be adjusted via a wall switch. [Easy to install ceiling light] - The black ceiling light is equipped with hanging rope. Hang the hanging rope in the buckle of the lamp cover, the lamp can be hung stably on the lamp cover. So that the assembly can also be easily carried out by one person. All fastening components are included. [Wide Application ceiling light] - The fully sealed design of living room lights ceiling can effectively prevent mosquitoes and dust from entering. You can install the ceiling lights in most places such as living room, bedroom, lounge, dining room, kitchen, office etc. [Grouping function of remote control] - Firstly, make sure that the two groups of lights A and B have completed the code pairing with the remote. Long press the button A while turning on the switch, the lamp flashes to indicate successful grouping of group A lights. Turn off. Then do the same for group B lights. Press button A, then you can use the remote to adjust the light settings of group A. The same for group B.