Compare webshops (1)
Sponsored links · Some shops pay us a fee
Shops with other sizes
Press Tool Required - Not Push Fit: This is an M Profile press fit fitting. You need a compatible press gun and the matching M15, M22 or M28 jaw to compress all three sleeves onto the copper tube ends. It cannot be hand-assembled. Three Equal Connections - Press x Press x Press: All three ends are the same diameter (15mm, 22mm or 28mm) and all three use M Profile press connections. Use it to split or combine flow at 90 degrees from the main pipe run. WRAS, DVGW and BSI Approved: Certified for hot and cold water, vented and unvented heating systems, and chilled water. Rated to 16 bar from -24 deg.C to 110 deg.C. Compatible with BS EN 1057 R250 and R290 copper tube. EPDM O-Ring on All Three Ends: Each port has its own black EPDM sealing element. Deburr all three pipe ends and insert to the correct depth before pressing each connection individually. No Naked Flame - No Hot Works Permit: No solder, no flux, no open flame on any of the three connections. Use in occupied buildings and confined spaces without hot works permits.