Compare webshops (1)
Sponsored links · Some shops pay us a fee
Shops with other sizes
Press Tool Required - Not Push Fit: This is an M Profile press fit fitting. You need a compatible press gun and the correct jaw size for each port to compress all three connections. Use the jaw size matching the largest port first. Reduced Branch Size - Sized L x C(Branch) x R: The centre branch outlet is a smaller diameter than the two main run ends. The size is quoted Left x Centre x Right - for example 22 x 15 x 22 means a 22mm main run with a 15mm branch outlet. WRAS, DVGW and BSI Approved: Certified for hot and cold water, vented and unvented heating systems, and chilled water. Rated to 16 bar from -24 deg.C to 110 deg.C. Compatible with BS EN 1057 R250 and R290 copper tube. EPDM O-Ring on All Three Ports: Each connection has its own black EPDM sealing element. Deburr all pipe ends and insert to the correct depth before pressing each port separately. No Naked Flame - No Hot Works Permit: No solder, no flux, no open flame on any of the three connections. Use in occupied buildings and confined spaces without hot works permits.