LavaTap Replacement Boiling Water Tap Tank 2.4L, Filter Kit and BSP Adaptor Swaps a failed under sink boiler, keeps suitable 3-in-1 mixer, first cartridge included, 1.5kW, 14 heat settings, 13A plug

Prices from
169.99

Sponsored links

COMPARE ALL WEBSHOPS (2)

Description

Amazon TANK, FILTER KIT AND 1/2" ADAPTOR IN ONE BOX: A 2.4 litre replacement boiling water tank with a filter kit (filter housing and first cartridge) and one 3/8" BSP female to 1/2" BSP male brass bush. The bush converts one 3/8" connection for a tap hose with a 1/2" female end, as on ProBoil 2X taps. No washer is included, so reuse your seal and check the threads first. It also fits LavaTap taps without the bush. COMPATIBILITY WITH OTHER BRANDS VARIES: Taps from other makers can use different hose ends and tube sizes, so check your tap's connections before you buy. Taps with a 1/2" female hose need the version with the 1/2" adaptor, and taps on 6 mm push-fit tube need the version with the 6 mm adaptor. Not sure? Send us a photo of your connections and we will tell you which one you need. GUARANTEE ON THE TANK: The heating element is covered for 5 years and the sensor and control board for 2 years. Cover runs from installation and is for manufacturing faults in normal domestic use, held by the original buyer. Register within 30 days of installation, using the guarantee card in the box, because your cover is not active until you do. Buy it with a LavaTap tap as a full kit and every part is covered for at least 2 years. WATER FIRST, AND KEEP YOUR COVER VALID: Run the tap until the flow is steady to fill the tank, and only then plug it in, because a dry-fired element is not covered. Have it fitted by a qualified installer with genuine parts, hand-tighten the 3/8" connections, and change the filter every 6 months with a genuine filter. Not covered: DIY installation, dry-firing, limescale, frost and non-genuine parts or filters. GENUINE FILTER FROM DAY ONE: The filter housing and first cartridge are in the box. It is an anti-scale carbon filter for scale, chlorine and odour, rated for 1.5 to 5 bar water pressure, with 1/4" (6.4 mm) push-fit tube connections. Change the cartridge at least every 6 months, or sooner in hard water, and keep the receipts to keep your guarantee valid. UP TO 60 CUPS AN HOUR, FITS UNDER THE SINK: Up to 1.7 litres at up to 98 °C on demand. 45 to 98 °C over 14 settings, auto reheat, a 1.5 kW element with a thermal cut-out, 230 V, 13A plug and 110 cm lead. It measures 240 W x 330 H x 220 D mm: stand it upright, indoors (0–35 °C), with 10–15 cm clear on three sides. Works at 1.5 to 5 bar; fit a reducing valve above 5 bar. IPX4.

Compare webshops (2)

Sponsored links · Some shops pay us a fee

Sort by:

£ 169.99

£ 178.99

Description (1)

TANK, FILTER KIT AND 1/2" ADAPTOR IN ONE BOX: A 2.4 litre replacement boiling water tank with a filter kit (filter housing and first cartridge) and one 3/8" BSP female to 1/2" BSP male brass bush. The bush converts one 3/8" connection for a tap hose with a 1/2" female end, as on ProBoil 2X taps. No washer is included, so reuse your seal and check the threads first. It also fits LavaTap taps without the bush. COMPATIBILITY WITH OTHER BRANDS VARIES: Taps from other makers can use different hose ends and tube sizes, so check your tap's connections before you buy. Taps with a 1/2" female hose need the version with the 1/2" adaptor, and taps on 6 mm push-fit tube need the version with the 6 mm adaptor. Not sure? Send us a photo of your connections and we will tell you which one you need. GUARANTEE ON THE TANK: The heating element is covered for 5 years and the sensor and control board for 2 years. Cover runs from installation and is for manufacturing faults in normal domestic use, held by the original buyer. Register within 30 days of installation, using the guarantee card in the box, because your cover is not active until you do. Buy it with a LavaTap tap as a full kit and every part is covered for at least 2 years. WATER FIRST, AND KEEP YOUR COVER VALID: Run the tap until the flow is steady to fill the tank, and only then plug it in, because a dry-fired element is not covered. Have it fitted by a qualified installer with genuine parts, hand-tighten the 3/8" connections, and change the filter every 6 months with a genuine filter. Not covered: DIY installation, dry-firing, limescale, frost and non-genuine parts or filters. GENUINE FILTER FROM DAY ONE: The filter housing and first cartridge are in the box. It is an anti-scale carbon filter for scale, chlorine and odour, rated for 1.5 to 5 bar water pressure, with 1/4" (6.4 mm) push-fit tube connections. Change the cartridge at least every 6 months, or sooner in hard water, and keep the receipts to keep your guarantee valid. UP TO 60 CUPS AN HOUR, FITS UNDER THE SINK: Up to 1.7 litres at up to 98 °C on demand. 45 to 98 °C over 14 settings, auto reheat, a 1.5 kW element with a thermal cut-out, 230 V, 13A plug and 110 cm lead. It measures 240 W x 330 H x 220 D mm: stand it upright, indoors (0–35 °C), with 10–15 cm clear on three sides. Works at 1.5 to 5 bar; fit a reducing valve above 5 bar. IPX4.


Product specifications

Brand LavaTap
EAN
  • 5061038673890
Color
  • Black
Size
MPN
  • HOT-TANK-PACK


Price History

* Price history contains no data from Amazon.

Prices were last updated on:

Featured Choice
£ 169.99
To Shop