LavaTap Replacement Boiling Water Tap Tank 2.4L with 6mm Push Fit Adaptor Under sink boiler swap, 1.5kW, 230V, 13A plug, 3/8 BSP terminals, blue locking clip, sealing washer, hand tightened

Prices from
154.99

Sponsored links

COMPARE ALL WEBSHOPS (1)

Description

Amazon FOR TAPS ON 6 MM TUBE, INCLUDING ELLSI, ETAL AND SAUBER: A 2.4 litre replacement boiling water tank, supplied with a 6 mm push-fit adaptor, washer and clip. If your tank has failed, keep your tap. The adaptor screws onto the tank's 3/8" BSP outlet. Push your 6 mm tube in until it stops, then fit the clip. LavaTap 3-in-1 and 4-in-1 taps fit too. ProBoil 2X and Bristan taps (1/2" hoses) need the tank with the 1/2" brass adaptor, and 8 mm tube needs a different fitting. UP TO 60 CUPS AN HOUR, 45 TO 98 °C: Up to 1.7 litres at up to 98 °C on demand, and up to 60 cups an hour for tea, coffee and cooking. Pick from 14 settings on the digital display. It reheats by itself when the water drops 5 °C below your setting. 1.5 kW element with a thermal cut-out, on a standard 230 V supply with a 13A plug and 110 cm lead. Insulated and quiet, and the display shows an error code if something needs a look. 5-YEAR HEATING ELEMENT GUARANTEE: The heating element is covered for 5 years and the sensor and control board for 2 years. Cover runs from installation and is for manufacturing faults in normal domestic use, held by the original buyer. Register within 30 days of installation, using the guarantee card in the box, because your cover is not active until you do. Buy it with a LavaTap tap and filter as a full kit and every part is covered for at least 2 years. WHAT KEEPS YOUR GUARANTEE VALID: Have it fitted by a qualified installer with genuine parts throughout. Fill the tank before you plug it in, and hand-tighten the 3/8" connections. Change the filter every 6 months with a genuine filter, and keep the receipts. Not covered: DIY installation, dry-firing, limescale or hard-water damage, frost, non-genuine parts or filters, and missed filter changes. FITS UNDER THE SINK: It measures 240 W x 330 H x 220 D mm. Stand it upright, indoors (0–35 °C) and uncovered, with 10–15 cm clear on three sides and room above for the hoses. It works at 1.5 to 5 bar water pressure. Fit a reducing valve if yours is above 5 bar. IPX4 splash protection. WATER FIRST, THEN POWER: Run the tap until the flow is steady. That fills the tank. Only then plug it in and switch on. A tank switched on empty burns out the element, and a dry-fired element is not covered by the guarantee.

Compare webshops (1)

Sponsored links · Some shops pay us a fee

Sort by:

£ 154.99

Description (1)

FOR TAPS ON 6 MM TUBE, INCLUDING ELLSI, ETAL AND SAUBER: A 2.4 litre replacement boiling water tank, supplied with a 6 mm push-fit adaptor, washer and clip. If your tank has failed, keep your tap. The adaptor screws onto the tank's 3/8" BSP outlet. Push your 6 mm tube in until it stops, then fit the clip. LavaTap 3-in-1 and 4-in-1 taps fit too. ProBoil 2X and Bristan taps (1/2" hoses) need the tank with the 1/2" brass adaptor, and 8 mm tube needs a different fitting. UP TO 60 CUPS AN HOUR, 45 TO 98 °C: Up to 1.7 litres at up to 98 °C on demand, and up to 60 cups an hour for tea, coffee and cooking. Pick from 14 settings on the digital display. It reheats by itself when the water drops 5 °C below your setting. 1.5 kW element with a thermal cut-out, on a standard 230 V supply with a 13A plug and 110 cm lead. Insulated and quiet, and the display shows an error code if something needs a look. 5-YEAR HEATING ELEMENT GUARANTEE: The heating element is covered for 5 years and the sensor and control board for 2 years. Cover runs from installation and is for manufacturing faults in normal domestic use, held by the original buyer. Register within 30 days of installation, using the guarantee card in the box, because your cover is not active until you do. Buy it with a LavaTap tap and filter as a full kit and every part is covered for at least 2 years. WHAT KEEPS YOUR GUARANTEE VALID: Have it fitted by a qualified installer with genuine parts throughout. Fill the tank before you plug it in, and hand-tighten the 3/8" connections. Change the filter every 6 months with a genuine filter, and keep the receipts. Not covered: DIY installation, dry-firing, limescale or hard-water damage, frost, non-genuine parts or filters, and missed filter changes. FITS UNDER THE SINK: It measures 240 W x 330 H x 220 D mm. Stand it upright, indoors (0–35 °C) and uncovered, with 10–15 cm clear on three sides and room above for the hoses. It works at 1.5 to 5 bar water pressure. Fit a reducing valve if yours is above 5 bar. IPX4 splash protection. WATER FIRST, THEN POWER: Run the tap until the flow is steady. That fills the tank. Only then plug it in and switch on. A tank switched on empty burns out the element, and a dry-fired element is not covered by the guarantee.


Product specifications

Brand LavaTap
EAN
  • 5061038674101
Color
  • Black

Featured Choice
£ 154.99
To Shop