Mavic Deemax Enduro SL Mullet 6 Bolt 29/27.5 BOOST Wheelset

Mavic Deemax Enduro Sl Mullet 29/27.5´´ Boost 6b Disc Tubeless Mtb Wheel Set. Ride with total confidence on the MAVIC Deemax Enduro SL Mullet wheelset. Developed for the demands of EWS stages, this 29/27.5” wheelset is packed with Mavic’s most advanced tech. The light yet strong Maxtal alloy rim is protected by a durable Black Shield treatment. Its 30mm width absorbs heavy impacts, while Fore technology allows for a simple, tape-free tubeless setup. Get instant engagement from the ID360 freewheel and efficient power transfer via the Infinity hub. This is the ultimate race-ready wheelset for control and speed on any terrain. Specially developed to perform on EWS stages as on your favorite track, Deemax Enduro SL includes the most advanced Mavic technologies to challenge you with confidence.Features:Maxtal aluminum alloy:- Light and strong. Exclusive to Mavic, this specific aluminum alloy offers a higher strength to weight ratio than conventional 6106 alloy.ISM light rim technology:- Strong where it matters, light everywhere else.Black Shield treatment (protects your rim against impacts and scratches):- This treatment doubles the rim´s lifespan against stone impacts and scratches. Super strong double coated treatment with a matt finish.Infinity hub design:- Efficient power transfer thanks to optimised non-contact spoke lacing (no noise under load) and tension distribution. The length of the spokes at the front and rear is identical. Maintenance is easy thanks to a tool-free solution.SUP welding technology:- Soda Using Process, stronger and smoother joint. After bending, the rim joint is arc welded. The welded seam is then milled for a smooth finish.QRM Auto bearing preload technology:- Those cartridge bearings are of course double sealed with C3 internal clearance. Their preload is automatically adjusted to guarantee a perfect spin with no play on the long run.Fore technology:- Stiffer and stronger. Instead of being drilled, the lower rim bridge is pushed up on the inside, then threaded to enable the spoke nipples to be directly screwed in it, leaving the upper rim bridge intact.Instant Drive 360 freewheel technology:- The new Instant Drive 360 freewheel system is super light and efficient. A large contactless rubber seal provides low friction, while a wide array of end caps makes it super versatile.UST tubeless technology:- Traction and control. Universal Standard for Tubeless. Ready to ride tubeless system. The UST concept improves traction, control and comfort whilst reducing inertia and flats.Ultra-reactive:- ISM4D construction allows to reduce the rim's weight without impacting the strength ID360 ratchet-equipped hub will be your best ally during fast pedaling sections Welded 30mm width rim offers more control and comfort.Race ready:- Patented Fore technology and Infinity hub allow to replace a broken spoke quickly during stage linkage, without removing the tyre or tubeless tape Tubeless compatibility without any tape (Fore technology) and wider central channel allow an easy tyre swap and ensure perfect and durable sealing Tested and approved by our most demanding pilots.Commit with confidence on any terrain:- Wider welded rim (30mm width) is designed to absorb heavy impacts Wide rim shape to facilitate DH casing tire between 2,0'' and 3,0'' set-up, which allows pilots to choose their favorite set-up The double rims surface protection (Blackshield), preserves the aesthetic condition of the rim against stones impacts.Specifications:Rims:- Material: Maxtal- Tire: UST Tubeless Ready- Braking: Disc- Joint: SUP welding technology- Height: 22 mm- Internal width: 30 mm- Profile: Asymmetrical- ETRTO size: 622/584x30TC- Drilling: Fore tapeless tubeless technology (front/rear 28 holes)- Weight Pair: 1930 gramsSpokes:- Shape: Straight, extra-flat, constricted, antirot (rear)- Material: Steel- Lacing: Crossed 3 (rear) - Nipples: Brass- Screw: M7Hubs:- Freewheel technology: Instant Drive 360- Bearing technology: QRM automatic setting sealed cartridge- Axle material: Aluminum- Body material: Aluminium- Freewheel: Shimano MS / Sram XD MTB- Axle size: Rear 12x148- Body design: Infinity- Disc standard: 6 Bolts onlyIntended use:- ASTM category 5: Gravity riding focused on the descent- Minimum tyre size: Width 52mm pressure max. 2.95Bar/43PSI- Maximum weight supported by the wheels: Must not exceed 150 Kg (bike weight included)- Maximum tyre size: Width 76mm pressure max. 2.45Bar/36PSICompatibility:- Freewheel body: Convertible Shimano HG MTB steel- Freewheel body: Convertible Shimano HG MTB aluminium- Rear axle adapters: 12x148 Convertible to 9x141In the box:- User guide- 2 replacement spokes- 2 Multifunction adjustment wrench with the rear wheel. tradeinn Bikeinn

Commit with confidence on any terrainWider welded rim (30mm width) is designed to absorb heavy impactsA wider rim easily facilitates Downhill tyres between 2.0" and 3.0" allowing you to choose your favouirte tyre with ease.The double rim surface protection (Blackshield), preserves the aesthetic condition of the rim against stones impactsRace readyPatented Fore technology and Infinity hub allow to replace a broken spoke quickly, without removing the tyre or tubeless tapeTubeless compatibility without any tape (Fore technology) and wider central channel allow an easy tyre swap and ensures perfect and durable sealingTested and approved by our most demanding ridersUltra-reactiveISM4D construction reduces the rim’s weight without impacting the strengthID360 ratchet-equipped hub will be your best ally during fast pedaling sectionsWelded 30mm width rim offers more control and comfortWeightPair: 1930gRear: 1010gFront: 920gADDITIONAL INFORMATIONWe designed the Deemax Enduro SL specifically to meet the demands of the Enduro World Series stages and to satisfy the most adventurous mountain bikers. The Deemax Enduro SL, benefits from the most advanced Mavic technologies to provide you with confidence and ultra-reactive handling.Maxtal Aluminium AlloyExclusive to Mavic. this specific aluminium alloy offers a higher strength to weight ratio than tradition 6106 alloyISM 4D Light Rim TechnologyInter Spoke Milling 4 Dimensions (ISM 4D) is an exclusive Mavic patented concept. The ISM 4D significantly reduces weight and inertia without compromising durability. Quicker accelerations, better handling; the right mix to make the most of any ride. The smooth profile also helps reduce aerodynamic drag.Fore Tapeless Tubeless TechnologyStiffer and Stronger. Instead of being drilled, the lower rim bridge is pushed up on the inside, then threaded to enable the spoke nipples to be directly screwed into it, leaving the upper rim bridge intact.Instant Drive 360 technologySuper light and efficient. The large contactless rubber seal provides low friction, while a wide array of end caps makes it super versatile.UST tubeless technologyTraction and control. Universal Standard for Tubeless. Ready to ride tubeless system. The UST concept improves traction, control and comfort whilst reducing inertia and flats.SUP Welding technologySoude Usine Process, stronger and smoother joint. After bending, the rim joint is arc welded. The welded seam is then milled for a smooth finish.Black Shield TreatmentThis treatment doubles the rim's lifespan against stone impacts and scratches. Super strong double coated treatment with a matt finish.Infinity hub designEfficient power transfer thanks to optimised non-contact spoke lacing (no noise under load) and tension distribution. The length of the spokes at the front and rear is identical. Maintenance is easy thanks to a tool-free solution.QRM Auto Bearing Preload TechnologyQualite de Roulements Mavic Auto. Cartridge bearings double sealed with e3 internal clearance. Preload is automatically adjusted to guarantee a perfect spin with no play on the long run.Technical Specifications:Profile depth: 22mmInner width: 30mmRear axle: 12x148mmDiscipline: DownhillSpokes: Straight Pull, Extra FlatNipples: Brass, BlackRim material: MaxtalTyre compatibility: UST Tubeless Ready Use with Mavic Tubeless TapeMaximum weight: 150kg including bikeBraking system: 6 Bolt OnlyBearings: QRM automatic setting sealed cartridgeETRTO Size: 622/584x30TC