Mavic E-Deemax S Mullet C-Lock 29/27.5" Boost Wheelset

Tredz Limited

Significant reduction in the risk of tyre cuts and puncturesThe simplest tubeless system on the marketReinforced hubTechnical Specifications:Profile depth: 22mmInner width: 30mmRear axle: 12x148mmFront axle: 15x110mm Discipline: DownhillSpokes: Straight, extra-flat, constricted, anti rotNipples: Brass BlackRim material: MaxtalTyre compatibility: UST Tubeless Ready Use with Mavic Tubeless TapeMaximum weight: 180kg including bikeBraking system: Centre LockBearings: QRM automatic setting sealed cartridgeETRTO Size: 622/584x30TCPair weight: 1990gFront weight: 915gRear weight: 1075gWhat's in the Box?Wheelset2 Multifunction adjustment wrench with the rear wheelUST valve not mounted on wheel2 Replacement spokes for each wheelUser guideUnderstanding the different Mavic freehub body acronyms:HG or M11 – Shimano HG Road 11/12x (other speeds with spacer)MS - Shimano MicrosplineXD - SRAM XDXD-R - SRAM XD-RED11 - Campagnolo 9/12xN3W - Campagnolo 13xFeatures & Benefits:Significant reduction in the risk of tyre cuts and puncturesThanks to its PFP (Pinch Flat Protection) rim sidewalls, this wheel is reinforced to withstand the toughest obstacles.The simplest tubeless system on the marketFore technology: stronger rim profile thanks to the reduction in the number of spoke holes, a completely airtight rim without rim tape for the best system on the market, offered by the pioneers of tubelessReinforced hubSpecifically designed for the additional torque of electric bike motors, validated for a total supported weight of 180 kg.The right wheel and tyre combination can improve your skills and upgrade the performance of your E-bike on challenging off-road terrain. The new E-Deemax S is built specifically for E-bikes and has some unique technologies to help you ride smoother and have more fun on the trail.Mavic's patented PFP technology (Pinch Flat Protection) features rims with a wider contact surface at the top of sidewall to significantly reduce the risk of tyre cuts and punctures. The 30mm wide rims allow you to run lower tyre pressure for better traction and smooth rolling efficiency. Our patented Fore technology features a fully sealed upper rim bridge that eliminates the need for rim tape, making it the easiest system for mounting and changing tubeless tyres.ISM rim machining removes material from the rims in strategic areas to minimise weight without compromising strength, and our new Black Shield treatment protects the rims against impacts and scratches. Mavic use 28 straight-pull spokes (same spoke length throughout) for a strong connection between the rim and hub, which has our ultra-reliable ID360 double ratchet system for quick engagement and acceleration.Maxtal Aluminium AlloyExclusive to Mavic. this specific aluminium alloy offers a higher strength to weight ratio than tradition 6106 alloyISM Light Rim TechnologyInter Spoke Milling (ISM) is an exclusive Mavic patented concept. It elminates all the excess material where it's not needed. Using a patented machining process, Mavic are able to vary the thickness of aluminium rims. In this way, the profile is lightened between each (thinner) spoke exactly where the mechanical stresses are lowest providing a 15% lighter rim without compromising on reliability.Fore Tapeless Tubeless TechnologyStiffer and Stronger. Instead of being drilled, the lower rim bridge is pushed up on the inside, then threaded to enable the spoke nipples to be directly screwed into it, leaving the upper rim bridge intact.Instant Drive 360 technologySuper light and efficient. The large contactless rubber seal provides low friction, while a wide array of end caps makes it super versatile.UST tubeless technologyTraction and control. Universal Standard for Tubeless. Ready to ride tubeless system. The UST concept improves traction, control and comfort whilst reducing inertia and flats.Pinch Flat Protection Sidewall20% Less Risk of puncture with 'PFP'. An E-Bike specific innovation to significantly reduce the risk of tyre cuts and puncturesSUP Welding technologySoude Usine Process, stronger and smoother joint. After bending, the rim joint is arc welded. The welded seam is then milled for a smooth finish.Black Shield TreatmentThis treatment doubles the rim's lifespan against stone impacts and scratches. Super strong double coated treatment with a matt finish.QRM Auto Bearing Preload TechnologyQualite de Roulements Mavic Auto. Cartridge bearings double sealed with e3 internal clearance. Preload is automatically adjusted to guarantee a perfect spin with no play on the long run.Intended UseMinimum tyre size: width 52mm - pressure max. 2.95Bar/43PSIMaximum tyre size: width 76mm - pressure max. 2.45Bar/36PSIASTM category 5 : gravity riding focused on the descent

Blacks

Significant reduction in the risk of tyre cuts and puncturesThe simplest tubeless system on the marketReinforced hubTechnical Specifications:Profile depth: 22mmInner width: 30mmRear axle: 12x148mmFront axle: 15x110mm Discipline: DownhillSpokes: Straight, extra-flat, constricted, anti rotNipples: Brass BlackRim material: MaxtalTyre compatibility: UST Tubeless Ready Use with Mavic Tubeless TapeMaximum weight: 180kg including bikeBraking system: 6 BoltBearings: QRM automatic setting sealed cartridgeETRTO Size: 622/584x30TCPair weight: 1990gFront weight: 915gRear weight: 1075gWhat's in the Box?Wheelset2 Multifunction adjustment wrench with the rear wheelUST valve not mounted on wheel2 Replacement spokes for each wheelUser guide:Understanding the different Mavic freehub body acronyms:HG or M11 – Shimano HG Road 11/12x (other speeds with spacer)MS - Shimano MicrosplineXD - SRAM XDXD-R - SRAM XD-RED11 - Campagnolo 9/12xN3W - Campagnolo 13xFeatures & Benefits:Significant reduction in the risk of tyre cuts and puncturesThanks to its PFP (Pinch Flat Protection) rim sidewalls, this wheel is reinforced to withstand the toughest obstacles.The simplest tubeless system on the marketFore technology: stronger rim profile thanks to the reduction in the number of spoke holes, a completely airtight rim without rim tape for the best system on the market, offered by the pioneers of tubelessReinforced hubSpecifically designed for the additional torque of electric bike motors, validated for a total supported weight of 180 kg.The right wheel and tyre combination can improve your skills and upgrade the performance of your E-bike on challenging off-road terrain. The new E-Deemax S is built specifically for E-bikes and has some unique technologies to help you ride smoother and have more fun on the trail.Mavic's patented PFP technology (Pinch Flat Protection) features rims with a wider contact surface at the top of sidewall to significantly reduce the risk of tyre cuts and punctures. The 30mm wide rims allow you to run lower tyre pressure for better traction and smooth rolling efficiency. Our patented Fore technology features a fully sealed upper rim bridge that eliminates the need for rim tape, making it the easiest system for mounting and changing tubeless tyres.ISM rim machining removes material from the rims in strategic areas to minimise weight without compromising strength, and our new Black Shield treatment protects the rims against impacts and scratches. Mavic use 28 straight-pull spokes (same spoke length throughout) for a strong connection between the rim and hub, which has our ultra-reliable ID360 double ratchet system for quick engagement and acceleration.Maxtal Aluminium AlloyExclusive to Mavic. this specific aluminium alloy offers a higher strength to weight ratio than tradition 6106 alloyISM Light Rim TechnologyInter Spoke Milling (ISM) is an exclusive Mavic patented concept. It elminates all the excess material where it's not needed. Using a patented machining process, Mavic are able to vary the thickness of aluminium rims. In this way, the profile is lightened between each (thinner) spoke exactly where the mechanical stresses are lowest providing a 15% lighter rim without compromising on reliability.Fore Tapeless Tubeless TechnologyStiffer and Stronger. Instead of being drilled, the lower rim bridge is pushed up on the inside, then threaded to enable the spoke nipples to be directly screwed into it, leaving the upper rim bridge intact.Instant Drive 360 technologySuper light and efficient. The large contactless rubber seal provides low friction, while a wide array of end caps makes it super versatile.UST tubeless technologyTraction and control. Universal Standard for Tubeless. Ready to ride tubeless system. The UST concept improves traction, control and comfort whilst reducing inertia and flats.Pinch Flat Protection Sidewall20% Less Risk of puncture with 'PFP'. An E-Bike specific innovation to significantly reduce the risk of tyre cuts and puncturesSUP Welding technologySoude Usine Process, stronger and smoother joint. After bending, the rim joint is arc welded. The welded seam is then milled for a smooth finish.Black Shield TreatmentThis treatment doubles the rim's lifespan against stone impacts and scratches. Super strong double coated treatment with a matt finish.QRM Auto Bearing Preload TechnologyQualite de Roulements Mavic Auto. Cartridge bearings double sealed with e3 internal clearance. Preload is automatically adjusted to guarantee a perfect spin with no play on the long run.Intended UseMinimum tyre size: width 52mm - pressure max. 2.95Bar/43PSIMaximum tyre size: width 76mm - pressure max. 2.45Bar/36PSIASTM category 5 : gravity riding focused on the descent

BikeInn

Mavic E-deemax S Mullet 29/27.5´´ Boost 6b Disc Tubeless Mtb Wheel Set. Conquer E-MTB trails with the MAVIC E-Demmax S Mullet wheelset. Engineered for electric power, these durable alloy wheels boast Maxtal rims with enhanced strength and pinch flat protection. Experience superior traction and control with UST tubeless technology, supported by the robust Infinity hub design for efficient power transfer and easy maintenance. Built to withstand extreme conditions and amplified E-bike torque, this wheelset offers exceptional resilience and a significantly minimized risk of punctures, ensuring you ride with confidence on every descent. Designed and engineered for the unique demands of E-MTBs,this durable wheel features alloy rims with enlarged rim bed & pinch flat protection making you benefit from the latest Mavic technologies.Features:Maxtal aluminum alloy:- Light and strong. Exclusive to Mavic, this specific aluminum alloy offers a higher strength to weight ratio than conventional 6106 alloy.ISM light rim technology:- Strong where it matters, light everywhere else.Black Shield treatment (protects your rim against impacts and scratches):- This treatment doubles the rim´s lifespan against stone impacts and scratches. Super strong double coated treatment with a matt finish.Infinity hub design:- Efficient power transfer thanks to optimised non-contact spoke lacing (no noise under load) and tension distribution. The length of the spokes at the front and rear is identical. Maintenance is easy thanks to a tool-free solution.SUP welding technology:- Soda Using Process, stronger and smoother joint. After bending, the rim joint is arc welded. The welded seam is then milled for a smooth finish.QRM Auto bearing preload technology:- Those cartridge bearings are of course double sealed with C3 internal clearance. Their preload is automatically adjusted to guarantee a perfect spin with no play on the long run.Instant Drive 360 freewheel technology:- The new Instant Drive 360 freewheel system is super light and efficient. A large contactless rubber seal provides low friction, while a wide array of end caps makes it super versatile.UST tubeless technology:- Traction and control. Universal Standard for Tubeless. Ready to ride tubeless system. The UST concept improves traction, control and comfort whilst reducing inertia and flats.Fore technology:- Stiffer and stronger. Instead of being drilled, the lower rim bridge is pushed up on the inside, then threaded to enable the spoke nipples to be directly screwed in it, leaving the upper rim bridge intact.Significantly minimized risk of tire cuts and punctures:- Thanks to its PFP (Pinch Flat Protection) rim sidewalls, this wheel is reinforced to endure the toughest obstacles.Easiest tubeless system on the market:- Fore technology stronger rim profil thanks to less spoke holes, Complete sealed rim and no rim tape for the best system on the market brought by the pionneers of tubeless.Reinforced hub:- Specially designed for the added torque of E-bike motors, validated for a total weight supported of 180 Kg.Specifications:Rims:- Material: Maxtal- Tire: UST Tubeless Ready- Braking: Disc- Joint: SUP welding technology- Height: 22 mm- Internal width: 30 mm- Profile: Asymmetrical- Drilling: Fore tapeless tubeless technology (front/rear 28 holes)- ETRTO size: 622/584x30TC- Weight Pair: 1987 gramsSpokes:- Shape: Straight, extra-flat, constricted, antirot (front)- Shape: Straight, flat, antirot (rear)- Material: Steel- Nipples: Brass- Lacing: Crossed 3 (front and rear) - Screw: M7Hubs:- Freewheel technology: Instant Drive 360- Bearing technology: QRM automatic setting sealed cartridge- Axle size: Front 15x110 / Rear 12x148- Axle material: Aluminum- Body material: Aluminium- Freewheel: Shimano MS / Sram XD MTB- Body design: Infinity- Disc standard: 6 BoltsIntended use:- ASTM category 5: Gravity riding focused on the descent- Minimum tyre size: Width 52mm pressure max. 2.95Bar/43PSI- Maximum tyre size: Width 76mm pressure max. 2.45Bar/36PSI- Maximum weight supported by the wheels: Must not exceed 180 Kg (bike weight included)Compatibility:- Freewheel body: Convertible Shimano HG MTB steel- Front axle adapters: 15x110 Convertible to 9x110 - Front axle adapters: Convertible to 15x31mm with Torque Cap - Freewheel body: Convertible Shimano HG MTB aluminium- Rear axle adapters: 12x148 Convertible to 9x141 In the box:- User guide- Multifunction adjustment wrench with the rear wheel- 2 replacement spokes with each wheel. tradeinn Bikeinn