Passion Craft® Cartridge Press Non Drip 2.0 with 20:1 Contact Pressure [Adjustable Hub] Silicone Syringe Gun for Cartridges 310 ml Including Joint Smoother Set

Easy to use: thanks to the ergonomic pressure control, you can adjust the stroke length of the supple nylon handle exactly to your hand size and desired feed. So you always have maximum control over your silicone press and can concentrate fully on the grouting. In addition, you save yourself unnecessary gripping when grouting, because the attachment angle of the tip can be adjusted and adjusted at any time thanks to the 360° rotating half shell. With a pressure ratio of 20:1, press with the support of 350 kg of concentrated force. Whether silicone, acrylic or other medium viscosity sealants and containers, you will stretch while others squeeze a wolf or bend the muscle spasm because you can transport no or too little material with one stroke due to too low or too high gear ratio. Easy to use. Because your silicone gun does. Thanks to the non-drip 2.0 function, the feed block relaxes as soon as you release the hub and no more pressure is applied to the cartridge. Container no longer runs uncontrolled, unnecessary material consumption is avoided, the tip stays clean and you show that you are not inferior to the professional when grouting How to care... a painful experience that many of our customers had to have in advance after it turned out that the press from the hardware store is not even suitable for toothpaste. This journey ends with us. Because we know how feed block, push rod etc. must be built to meet your quality requirements. See for yourself! With your Passion Craft cartridge press and the 4 x joint smoothers, you can start directly into your project with 14 variants full of joint variants. And so that everything works smoothly, you will receive our basic advice with useful tips as a PDF for digital mounting. Easy to use.