Peatys Link Lube Dry

BikeInn

Peaty´s Link Lube Dry Lubricant 120ml. Peaty´s Link Lube Dry offers a superior, wax-based lubrication for your chain in dry, dusty, or mildly moist conditions. Its readily biodegradable, water-based emulsion ensures a long-lasting, quiet, and clean-running drivetrain. For optimal performance, always apply to a thoroughly degreased and dry chain, allowing it to fully dry to a clear finish. This ensures the lube penetrates effectively, preventing dust attraction and delivering smooth rides. Exceptional *dry chain lube* for *mountain bikes* and *e-bikes*. This high-performance *bike lubricant* repels dust effectively, keeping your *bicycle chain* clean and lubricated even in dusty conditions. Users praise its longevity and smooth application, noting it outperforms other *dry lubes*. Ideal for *dry riding conditions. LinkLube Dry is a readily biodegradable, wax-based chain lube for use in desert dry and dusty, to mildly moist conditions. Our unique formula uses a blend of waxes suspended in a water-based emulsion to give you a long-lasting, clean-running, quiet chain.All Weather Vs. Dry:- Linklube all weather is our one-stop chain lube for most weather conditions. while the base carrier fluid we use has fast penetrating, chain cleaning properties, it will never become fully dry to the touch. this can lead to unwanted dust attraction in the driest, dustiest conditions, so a more bespoke dry lube is required.Application:- When applied for the first time, it is essential that linklube dry is applied to a well-degreased and dry drivetrain. if a chain is dirty, then dirt and old lube take up space in the rollers, preventing new lube from reaching the places it needs to, and any residual oil-based lube can also result in reduced durability and premature blackening.- Fully Degrease before applying fresh lube to ensure There is no old chain oil present. For best results use our foaming Drivetrain Degreaser or, in the case of brand new chains, use XXX Solvent Degreaser to remove stubborn factory greases.- Ensure you thoroughly rinse your chain with clean water after degreasing (degreaser is designed to eat chain lube after all).- Allow Chain TO dry Thoroughly Before Application.- Apply to the inside face of the chain only. the light blue colour to the chain lube allows you to see exactly where you have and haven't applied.- Keep the chain cycling for 20 seconds to help the lube penetrate fully into the pins and rollers.Check for over-application. You can tell if you over-apply linklube dry because you'll see the lube start to fill the narrow chain links. if this happens, just slowly cycle through your gears a few times to transfer the excess lube onto the cassette. you'll see the lube disappear from the narrow links, leaving lube only where it's needed on the chain.- Leave to fully dry so the lube goes from a light blue colour to completely clear (you're waiting for the water to evaporate, so leaving it in the sun helps). how long it takes for the water to evaporate - and for the lube to turn clear in colour - depends on the weather conditions. this can range from just a few minutes (if hot), to a few hours (if cold and damp). for best results apply the night before.- Ride!Caution:- Do not get LinkLube (or any lube for that matter!) on your brakes or brake pads. tradeinn Bikeinn

Amazon

Dry Lube Bike Chain Oil: Peaty's LinkLube Dry is a readily biodegradable, wax-based chain lube for use in dry, dusty or mildly moist conditions. Our formula uses a blend of waxes in a water-based emulsion to give you a long-lasting, clean and quiet chain Drip Wax Formula: Peaty's LinkLube Dry uses a unique blend of waxes in a water-based emulsion - a genuine drip wax chain lube that dries to a clean, protective layer. No sticky residue, no chain removal required. Just a quiet, dirt-resistant drivetrain Blue Indicator Dye: The light blue indicator dye lets you easily see where the bike chain lube is applied and know when it's ready to ride as it transitions to completely clear Extended Range Per Application: Peaty's LinkLube Dry bike lube offers coverage of up to ~300km / 190miles per application depending on the conditions, ensuring smoother, longer rides with fewer reapplications Easy Application: Shaped to fit like a pen in your hand, the slim, ergonomic bottle with a clear rounded applicator tip makes it simple to apply the bicycle chain lube smoothly and precisely along your chain

Blacks

For Desert Dry and Dusty to Mildly Moist conditions.Our readily biodegradable LinkLube Dry Weather chain lube uses a unique blend of waxes suspended in a water-based emulsion to give you a long-lasting, clean-running, quiet chain!Application Instructions:Fully degrease drivetrain. For best results, use Peaty's Drivetrain Degreaser. Ensure you thoroughly wash your chain with clean water after degreasing (degreaser is designed to eat chain oil after all). Remove as much water as you can from the chain - a quick wipe with a clean cloth will do fine. Give the bottle a good shake to evenly distribute the secret sauce. Apply but do not remove any excess lube.Allow lube to fully dry clear!RIDE! (Yes, you read that correctly!)