Salamander Pumps CT75 Xtra Shower Pump 2.0 Bar Pressure Twin End Suitable for Positive Head, Gravity Fed Systems Only WRAS Approved…

Plumbworld

Additional information:Suitable for boosting both the hot and cold water pressure to a thermostatic shower, the CT75 Xtra is a hard-working, affordable pump.CT Xtra pumps are only suitable for positive head, gravity fed systems. Installing a CT Xtra pump in a negative head system will mean the pump may not work.Shower Pump typePositive headTwin hot & coldCT75 Xtra will boost both hot and cold water pressure to a thermostatic shower in a gravity fed, positive head system.Thermostatic mixer shower With homes getting more technologically advanced consumers are finding that appliances are requiring higher pressures in order to operate. This could potentially cause you a problem if you have lower water pressure. A solution to this problem could be a Salamander shower pump. They are designed to boost pressure in both the hot and cold water supplies to thermostatic or manual mixer valves. They are also suitable for use with a large range of shower types and accessories such as heads. Twin Impeller Shower Pump Twin pumps are designed using the highest standard of technology to boost your water pressure of both hot and cold water supply to a single shower, bath, shower mixer or mixer tap. Put a stop to low water pressure with this pump. It is perfect for transforming your unsatisfactory shower into a powerful and invigorating shower that you'll never want to leave. Positive Head A positive head shower pump is designed to be gravity fed, therefore it needs a 'head' of distance (at least a metre) between the pump and the bottom of the cold water cistern. The gravity feed 'kick-starts' the pump, pushing water straight through to your shower.  Powerful noise reducing technology It’s no surprise that shower pumps can be on the noisy side considering the job that they do. That being said, they don’t have to be, providing they’re designed with noise reduction in mind. Salamander pumps are exactly that, featuring noise and vibration reducing feet which work in perfect sync with the natural vibration of the motor. Also, the materials used within the pump are capable of dampening the vibration of rotating parts, reducing noise further. Compact size Salamander are champions when it comes to producing small yet powerful shower pumps. This is not only great for an installer but you too, allowing you to fit and operate it in smaller than normal areas. Size really does matter when it comes to shower pumps and flexible installations. Crossover This pump features an innovatively designed bypass tube which diverts the water from the end of the pump that isn’t pumping water. This can happen when one tap is switched off when a bath or basin is being filled, so the crossover is there to stop the expansion from overheating on the side of the pump which doesn’t contain any water. Regenerative pump Regenerative pumps work in a similar way to a classic water mill, making them reliable and easy to install. This type of pump rotates incoming water and moves it back to the opposite side of the impeller. Silent ShoweringQuiet Mark approved means when the water is running you won't hear the pump operating - making it perfect for early morning and late night shower users! Continuously Rated Motor Continuously rated shower pumps effectively run until the user turns it off. This is particularly good in a family home where the shower needs to be used frequently throughout the morning or evening. A pump that isn’t continuously rated will turn itself off to allow the pump to cool, potentially causing issues with water pressure to the shower. Flexible hoses included This shower pump comes complete with 4 x 15mm Straight Pushfit Couplers (with Isolating Valve), which are used to link your shower pump to both incoming and outgoing water pipes. These hoses lmit the transfer of vibration from the motor and pump to the associated pipe work, helping to reduce noise and prevent damage to the pump itself. 3-Year GuaranteeWhen buying anything for your home you need to know that it's going to stand the test of time. This is why this product comes with a fantastic 3-year guarantee against any manufacturing defects should the worst happen and the product is not up to standard. WRAS Approved for qualityIf you’re buying any sort of water fitting or product then it’s important that its WRAS (Water Regulations Advisory Scheme) approved. It’s the best way to work out if that particular product or part complies with the UK requirements for installation within the UK.

National Shower Spares

CT75 Xtra is a 2.0 bar pressure, twin ended, positive shower pump. Suitable for boosting both the hot and cold water pressure to a thermostatic shower, the CT75 Xtra is a hard-working, affordable pump. CT Xtra pumps are only suitable for positive head, gravity fed systems. Installing a CT Xtra pump in a negative head system will mean the pump may not work. Maximum pressure rating (closed head) 2.0 bar. Pressure rating (8 litres/minute) 1.8 bar. Suitable for positive head installations only. @@@mSZDq82JQLEoMzcUlImuho5B4jk6vdbU@@@ minimum head 600mm. For gravity fed water systems only. Twin impellers for boosting both hot and cold water supplies simultaneously. Continuously rated induction motor with even better efficiency. Regenerative impeller motor. Carbon seals. 15mm push-fit flexi connectors. Supplied with AV couplers. Compact size 165mm x 120mm x 195mm (H x W x D). Weight 3.78kg. Noise and vibration reduction with very minimal background noise (as low as 65.1dB), including special anti-vibration feet. You can also purchase an anti-vibration pump mat as an optional extra. Ideal for boosting conventional, multi-function, and advanced spray showers (multiple outlets at a time supported). Salamander Motor Pump Integration technology: compact size, aids cooling, and longer life. Salamander Solid State Switching technology: reliable, consistent, and fast switch on. 3 year manufacturer's guarantee, which can be extended to 5 years with Salamander PumpWise registration. WRAS approved. Installation guide included. The Salamander CT Range does not necessarily need a flange, provided that the pump is installed at the base of the hot water cylinder, the cold-water tank is higher than 1.2m above the cylinder, and the pump is ‘teed’ off the first downward leg from the cylinder. If this is not the case, see the Salamander 22mm S-Flange. The Salamander CT Xtra shower pumps are the UK's best-selling range. They are one of the quietest pumps on the market and are great value for money. @aj9SkF9TeX0@ Genuine brand new Salamander product, covered by a Salamander manufacturer's guarantee.

ManoMano

The new Salamander CTXTR pump replaces the long standing CT75. This is still supplied with 15mm compression flexi hoses and boasts a quieter motor than the previous CT75 model. To boost tank-fed supplies to instantaneous electric showers, water heaters, washing machines and combination boilers - according to inlet pressure requirements. Through the application of technologies developed for Salamander s impressive new HomeBoost product, they have delivered a range of improved shower pumps, packed with performance and innovation identified by using the new Tech2ology inside logos and icons . The patented technologies used in the new CT Xtra and new CT FORCE ranges, are industry leading, and give both the consumer and installer excellent performance, and are easier to install. Benefits of the CT75 Xtra Noise/Vibration Reduction - noise 53dB A weighted emission sound pressure at 1m Solid State Switching - reliable, consistent, fast switch on Motor Pump Integration - compact size, aids

City Plumbing

Salamander Pumps' CT75+ Xtra pump is a hard-working affordable pump. Robust, compact and quiet, this pump is the ideal way to boost the water pressure to a single shower. This product is a twin impeller shower pump, suitable for boosting both hot and cold water in positive head, gravity fed installations.