Salamander Pumps Right RP75TU Shower Pump 2.2 Bar Pressure Twin End Suitable for Any (+ or ) Gravity Fed Systems Quiet Mark

Plumbworld

Additional information:RP75TU is suitable for positive and negative head, gravity fed systems. Shower Individual Outlet Bathroom Whole House Pump Type Positive Head Negative Head Twin Hot & ColdTwin ended, universal (negative head) Right Pumps will boost the water pressure to a range of outlets including: Toilet Wash Basin Dishwasher Washing Machine Thermostatic Mixer Shower Drench Shower Head Multi-Function Shower Head With homes getting more technologically advanced consumers are finding that appliances are requiring higher pressures in order to operate. This could potentially cause you a problem if you have lower water pressure. A solution to this problem could be a Salamander shower pump. They are designed to boost pressure in both the hot and cold water supplies to thermostatic or manual mixer valves. They are also suitable for use with a large range of shower types and accessories such as heads. Powerful noise reducing technology It’s no surprise that shower pumps can be on the noisy side considering the job that they do. That being said, they don’t have to be, providing they’re designed with noise reduction in mind. Salamander pumps are exactly that, featuring noise and vibration reducing feet which work in perfect sync with the natural vibration of the motor. Also, the materials used within the pump are capable of dampening the vibration of rotating parts, reducing noise further. Solid state switching Solid State Switching is the activation system used within Salamander shower pumps. Where other pumps rely upon moving parts within them to activate, the new solid state switching from Salamander uses an electronically operated switch with no moving parts, thus improving the reliability, the sensitivity, and the overall product life. Crossover This pump features an innovatively designed bypass tube which diverts the water from the end of the pump that isn’t pumping water. This can happen when one tap is switched off when a bath or basin is being filled, so the crossover is there to stop the expansion from overheating on the side of the pump which doesn’t contain any water. Twin Impeller Shower Pump Twin pumps are designed using the highest standard of technology to boost your water pressure of both hot and cold water supply to a single shower, bath, shower mixer or mixer tap. Put a stop to low water pressure with this pump. It is perfect for transforming your unsatisfactory shower into a powerful and invigorating shower that you'll never want to leave. Universal Pump This universal pump is suitable for use with both a positive or negative head. It boosts water pressure for gravity fed hot water systems, giving you the perfect shower each and every day. Premium twin end pump This wonderful premium twin end pump is compatible with showers, baths, basins, toilets, and a range of other home appliances when installed in a positive head gravity fed system. The pump works to efficiently boost both the hot and cold-water supply as quietly as possible. Silent ShoweringQuiet Mark approved means when the water is running you won't hear the pump operating - making it perfect for early morning and late night shower users! Continuously Rated Motor Continuously rated shower pumps effectively run until the user turns it off. This is particularly good in a family home where the shower needs to be used frequently throughout the morning or evening. A pump that isn’t continuously rated will turn itself off to allow the pump to cool, potentially causing issues with water pressure to the shower. 3-Year GuaranteeWhen buying anything for your home you need to know that it's going to stand the test of time. This is why this product comes with a fantastic 3-year guarantee against any manufacturing defects should the worst happen and the product is not up to standard. Flexible hoses included This shower pump comes complete with 4 x 22mm Pushfit Couplers (2 x Straight, 2 x Angled) (with Isolating Valve), which are used to link your shower pump to both incoming and outgoing water pipes. These hoses lmit the transfer of vibration from the motor and pump to the associated pipe work, helping to reduce noise and prevent damage to the pump itself. WRAS Approved for qualityIf you’re buying any sort of water fitting or product then it’s important that its WRAS (Water Regulations Advisory Scheme) approved. It’s the best way to work out if that particular product or part complies with the UK requirements for installation within the UK.

National Shower Spares

Salamander RP75TU 2.0 Bar Twin Impeller Universal Bathroom Pump. Suitable as a direct replacement for the older Salamander ESP75 CPV pumps. Maximum pressure rating (closed head) 2.2 bar. Pressure rating (8 litres/minute) 2.1 bar. Suitable for positive or negative head (universal) installations. For gravity fed water systems only. Twin impellers for boosting both hot and cold water supplies simultaneously. Great for boosting supplies to an individual shower or the whole bathroom. Continuously rated induction motor with even better efficiency. Centrifugal impeller motor. Carbon seals. 22mm push-fit flexi connectors. Supplied with AV couplers and isolating valves. Compact size 317mm x 148mm x 331mm (H x W x D). Weight 7.19kg. One of the quietest pump ranges in the UK - only 50.2dB. Noise and vibration reduction with very minimal background noise, including special anti-vibration feet. Salamander Crossover technology: choose between individual outlet operations. Salamander Motor Pump Integration technology: compact size, aids cooling, and longer life. Salamander Solid State Switching technology: reliable, consistent, and fast switch on. 3 year manufacturer's guarantee, which can be extended to 5 years with Salamander PumpWise registration. WRAS approved. Installation guide included. When installing a pump, an S-flange may be required to encourage aeration to follow a natural path to the vent and prevents aerated supply water being drawn into the pump. See the Salamander 22mm S-Flange. Genuine brand new Salamander product, covered by a Salamander manufacturer's guarantee.

ManoMano

The RP75 TU pump is a 2.0 bar twin universal centrifugal shower pump suitable for boosting water performance in a gravity fed negative head or positive head system. This pump can be used with conventional and multi-function showers and a shower head up to 125mm. With crossover technology inside allowing for individual outlet (hot or cold) operation, this pump is the perfect solution for boosting shower or bathroom performance. AV couplers with isolating valves are included. Specification: Noise 50.2dBA Mechanical Seal Nitrile/Carbon/Ceramic Anti-vibration feet Yes Inlet isolators Yes Flexible Hoses 4 Pressure @ closed head 2.2 bar Pressure @ 8lpm 2.1 bar Pressure @ 16lpm 1.9 bar Maximum water Temperature 60 C Pump connections 3/4" BSP Pressure vessel air pre-charge 14 psi Motor type A.C Induction Motor duty rating Continuously rated

City Plumbing

The Salamander RP75TU pump is a 2. 0 bar twin centrifugal shower pump. It features crossover technology allowing it to quietly and efficiently boost hot and cold water supplies to showers, baths, basins and toilets in negative or positive head, gravity fed installations. The Salamander RP75TU pump can be used with conventional and multi-function showers and a shower head up to 125mm. The pump includes AV couplers with isolating valves.