Salamander Pumps Right RP50PT Shower Pump 1.5 Bar Pressure Twin End Suitable for Positive Head, Gravity Fed Systems Only Quiet Mark

Plumbworld

Additional information:RP50PT is only suitable for positive head, gravity fed systems. Installing in a negative head system will mean the pump may not work. Shower Individual Outlet Bathroom Whole House Pump Type Positive Head Twin Hot & ColdTwin ended, positive Right Pumps will boost the water pressure to a range of outlets including: Toilet Wash Basin Thermostatic Mixer Shower Drench Shower Head Multi-Function Shower Head With homes getting more technologically advanced consumers are finding that appliances are requiring higher pressures in order to operate. This could potentially cause you a problem if you have lower water pressure. A solution to this problem could be a Salamander shower pump. They are designed to boost pressure in both the hot and cold water supplies to thermostatic or manual mixer valves. They are also suitable for use with a large range of shower types and accessories such as heads. Positive Head Positive head shower pumps are for gravity-fed systems only. As a rule, if your cold-water tank is above the shower (maybe you have a shower in a converted room downstairs) and you have a flow rate as little as 0.5 bar, then you will need a positive head shower pump. Twin Impeller Shower Pump Twin pumps are designed using the highest standard of technology to boost your water pressure of both hot and cold water supply to a single shower, bath, shower mixer or mixer tap. Put a stop to low water pressure with this pump. It is perfect for transforming your unsatisfactory shower into a powerful and invigorating shower that you'll never want to leave. Powerful noise reducing technology It’s no surprise that shower pumps can be on the noisy side considering the job that they do. That being said, they don’t have to be, providing they’re designed with noise reduction in mind. Salamander pumps are exactly that, featuring noise and vibration reducing feet which work in perfect sync with the natural vibration of the motor. Also, the materials used within the pump are capable of dampening the vibration of rotating parts, reducing noise further. Solid state switching Solid State Switching is the activation system used within Salamander shower pumps. Where other pumps rely upon moving parts within them to activate, the new solid state switching from Salamander uses an electronically operated switch with no moving parts, thus improving the reliability, the sensitivity, and the overall product life. Crossover This pump features an innovatively designed bypass tube which diverts the water from the end of the pump that isn’t pumping water. This can happen when one tap is switched off when a bath or basin is being filled, so the crossover is there to stop the expansion from overheating on the side of the pump which doesn’t contain any water. Premium twin end pump This wonderful premium twin end pump is compatible with showers, baths, basins, toilets, and a range of other home appliances when installed in a positive head gravity fed system. The pump works to efficiently boost both the hot and cold-water supply as quietly as possible. Silent ShoweringQuiet Mark approved means when the water is running you won't hear the pump operating - making it perfect for early morning and late night shower users! Continuously Rated Motor Continuously rated shower pumps effectively run until the user turns it off. This is particularly good in a family home where the shower needs to be used frequently throughout the morning or evening. A pump that isn’t continuously rated will turn itself off to allow the pump to cool, potentially causing issues with water pressure to the shower. 3-Year GuaranteeWhen buying anything for your home you need to know that it's going to stand the test of time. This is why this product comes with a fantastic 3-year guarantee against any manufacturing defects should the worst happen and the product is not up to standard. Flexible hoses included This shower pump comes complete with 4 x 15mm Pushfit Couplers (2 x Straight, 2 x Angled) (with Isolating Valve), which are used to link your shower pump to both incoming and outgoing water pipes. These hoses lmit the transfer of vibration from the motor and pump to the associated pipe work, helping to reduce noise and prevent damage to the pump itself. WRAS Approved for qualityIf you’re buying any sort of water fitting or product then it’s important that its WRAS (Water Regulations Advisory Scheme) approved. It’s the best way to work out if that particular product or part complies with the UK requirements for installation within the UK.

Amazon

SALAMANDER RP50PT PUMP: The Right Pumps 50PT from Salamander Pumps is a shower pump to boost hot and cold water supplies to showers, cisterns, taps, and other whole house applications. This pump is a 1.5 bar twin centrifugal pump suitable for boosting both hot and cold water pressure to a house, in a gravity fed, positive head system. WRAS approved, awarded the Quiet Mark, and with a 3 year assurance, this is a strong solution to poor pressure in a home. RIGHT PUMP RANGE: Our Right Pump range offers the most powerful performance of all of our shower pumps. These pumps will boost hot and/or cold water supplies to a variety of domestic outlets, even in whole house applications. These pumps are only suitable for a gravity-fed system, with pumps available in both positive and negative (universal) heads. With extremely quiet designs, these pumps are perfect for boosting a house. GRAVITY FED SYSTEM: The RP50PT is only compatible with gravity fed systems, which means a system in which there is a hot water cylinder in an airing cupboard and a large cold water tank in the loft. It is important to choose a pump that is compatible with the system in your home, as incorrect selection can mean the pump will not work. SUITABLE FOR USE IN WHOLE HOUSE: When selecting the right pump for your home, it is important to note that you can go up the range, but never down. For instance, a whole home pump (e.g. CTForce 30PT) can power a shower alone, but a shower only pump (e.g. CT50 Xtra) can NOT power a cistern, taps, whole house etc. The Right Pumps 50PT pump is compatible with whole house applications, such as a bath, electric shower, wash basin, and home appliances. 1.5 BAR PRESSURE: The RP50PT pump offers 1.5 bar pressure, which is enough to boost water pressure to a whole house. This quiet pump produces only 45.4dBA of noise as it is used, which makes it the quietest twin end pump in the UK, and has been awarded the Quiet Mark., Weight: 10.8467432904 pounds, Manufacturer: Salamander Pumps

National Shower Spares

Salamander RP50PT 1.5 Bar Twin Impeller Positive Bathroom Pump. Formerly known as RHP50 or RSP50. Maximum pressure rating (closed head) 1.5 bar. Pressure rating (8 litres/minute) 1.35 bar. Suitable for positive head installations only. For gravity fed water systems only. Twin impellers for boosting both hot and cold water supplies simultaneously. Great for boosting supplies to an individual shower or the whole bathroom. Continuously rated induction motor with even better efficiency. Centrifugal impeller motor. Carbon seals. 15mm push-fit flexi connectors. Supplied with AV couplers and isolating valves. Compact size 161mm x 148mm x 270mm (H x W x D). Weight 4.92kg. One of the quietest pump ranges in the UK - only 45.5dB, as independently tested by Salford University. Noise and vibration reduction with very minimal background noise, including special anti-vibration feet. Salamander Crossover technology: choose between individual outlet operations. Salamander Motor Pump Integration technology: compact size, aids cooling, and longer life. Salamander Solid State Switching technology: reliable, consistent, and fast switch on. 3 year manufacturer's guarantee, which can be extended to 5 years with Salamander PumpWise registration. WRAS approved. Installation guide included. When installing a pump, an S-flange may be required to encourage aeration to follow a natural path to the vent and prevents aerated supply water being drawn into the pump. See the Salamander 22mm S-Flange. Genuine brand new Salamander product, covered by a Salamander manufacturer's guarantee.

ManoMano

Please note RSP50 is no longer available but has been directly replaced with Salamander RP50PT. Save on money with the Salamander RP50PT 1.5 Bar Twin Positive Head Centrifugal Shower and Bathroom Pump. A shower and bathroom pump is the efficient and effective way to boost your water pressure, without having to splurge on buying all new bathroom fittings. Part of the Right Pumps range from Salamander, this shower pumps take pride in a powerful performance, allowing you to maintain higher flow rates, the centrifugal impeller offers an extra boost to your shower and is quiet with it too. This luxury twin ended pump will boost your hot and cold water supplies to your shower, bath, basins and toilets in a smooth yet effective manner, whilst staying almost silent(45.5dba). A twin impeller shower pump will boost both hot and cold supplies equally so that you’ll receive a powerful and invigorating flow that will help to kick-start your day, and as it has a bar pressure of 1.5, you will

City Plumbing

The Salamander RP50PT pump is a 1. 5 bar twin centrifugal shower pump. It features crossover technology allowing it to quietly and efficiently boost hot and cold water supplies to showers, baths, basins and toilets in positive head, gravity fed installations. The Salamander RP50PT pump can be used with conventional and multi-function showers and a shower head up to 100mm. The pump includes AV couplers with isolating valves.