seeed studio Wio Terminal ATSAMD51 Core Development Board con Realtek RTL8720DN Bluetooth 5.0 Wi Fi 2.4G / 5G Supporto MicroPython/Raspberry Pi

🚀【Highly Integrated Design】The Wio Terminal is an Arduino-compatible development board, equipped with a 2.4” LCD Screen, onboard IMU(LIS3DHTR), Microphone, Buzzer, microSD card slot, Light sensor, and Infrared Emitter(IR 940nm). Well-designed enclosure with built-in magnets and two mounting holes, allowing you to set up your IoT project without hassle. 🚀【Powerful MCU & Reliable Wireless Connectivity】The Wio Terminal is built around an ARM Cortex M4F system-on-a-chip, which is a 32-bit ARM processor running at 120Mhz (200Mhz burst). It features 4MB storage, 192k RAM, and there’s a Realtek RTL8720DN wireless chip providing Wi-Fi (2.4G/5G) and Bluetooth (BLE4/5.0) connectivity. 🚀【 Raspberry Pi 40-pin Compatible GPIO 】The Wio Terminal can be mounted on Raspberry Pi as a slave device, and Raspberry Pi's HAT can be used with an adapter cable. Since it supports over 300 Grove modules, you can start programming directly and collect data without soldering or breadboards. 🚀【USB OTG Support 】The USB-C connector is how you power the device now, though a battery kit is to be available soon. The Wio Terminal can act as both a USB client, to emulate a keyboard, mouse or MIDI device to the host PC; or a host, so it can read signals from a wired game controller. You can use the 40-pin on the back for power supply when using USB Host/Client function. 🚀【 Software Support 】The Wio Terminal supports Arduino, MicroPython, Ardupy, AT Firmware, Visual Studio Code, CircuitPython (coming soon). You’ll be able to program in Python using the MS Visual Code editor, yet still import your favorite Arduino libraries (or make use of existing ArduPy ones).