Trend Bearing Guided Profiler Router Bit 46/95X1/4TC

This guide bearing router bit is designed for profiling and rebating applications. It features mounted bearings at the end of the cutter for precise guidance and can be used with a router mounted above or below a table when following a template. It is suitable for creating templates and working on both straight and curved profiles, but is not intended for plunge, cutting, or grooving operations. Technical specifications include a 1/4 inch shank, a cutting diameter of 12.7 mm (1/2 inch), a cutting length of 25.4 mm (1 inch), and a cutting height of 12.7 mm (1/2 inch) with a 90-degree angle. The cutter is tungsten carbide tipped and designed for profiling and rebating tasks with compatibility for various router setups.

Features

• Tungsten carbide tipped for extended sharpness
• 1/4 in shank fits standard routers
• Bearing-guided for straight or curved profiles
• 90° cutting angle for profiling and rebating
• Works with templates on table or above-table routing

Specifications

• Cutting diameter: 12.7 mm (1/2 in)
• Cutting length: 25.4 mm (1 in)
• Cutting height: 12.7 mm (1/2 in)
• Shank: 1/4 in
• Applications: profiling and rebating only
• Not for plunge cutting or grooving

Follow safety guidelines for router operation and ensure the bit is properly aligned before use. Install the bit securely into a compatible router with a 1/4 inch shank and ensure the bearings are properly mounted at the end of the cutter. This tool is for profiling and rebating only and is not suitable for plunge cutting or grooving. When copy profiling, leave a ~3 mm overlap, and when using plastic laminate, allow adhesive to dry before trimming to avoid clogging the guide bearing.