Universal Motorcycle LED Turn Signal Running Light Effect (E Approved) / Scooter Indicator (ECE) (V4)

Known by well-known car manufacturers, the technology of sequential indicators (so-called Running light effects) now also developed for the bike. The indicator lights are E-approved (E4 50R 11+12) and can therefore be used legally without TÜV registration, in road traffic. The indicator lights are made of black plastic and the indicator glass is in clear glass. For an improved grip and vibration reduction, the indicator on the mounting arm is rubber-mounted. A pair consisting of two indicators. Thanks to this LED indicator, with a so-called running light effect, your motorcycle will be an absolute eye-catcher even in the dark. You not only visually enhance your vehicle, but also increase your safety, because the sequential LED indicators (so-called Running effect) the other road users will be increasingly noticed by the special flashing frequency and brighter LED luminosity Mounting instructions: +++ Thread: M10 +++ Thread length: approx. 20 mm (2 cm) +++ Cable length approx. 25 cm +++ The connection is via two cable: indicator positive pole (yellow) / indicator (ground) negative pole (black). Note: LED indicators require less power than standard filament indicators. It is possible that you have to replace the original relay with a load-independent LED relay. If the LED indicators light too quickly or permanently after installation, the original relay must be replaced with an LED relay (see product description below!)