WAN2TLK 50ml Thread Lock Blue, Medium Strength Locktight Threadlock for Gap Filling and Tighten Bolts Nuts, Anti Rust&Loosening, Tight Sealant

Lock Tight Thread Lock: The threadlock agent has strong adhesion, and can fix screws and nuts, lock tight ensures close contact and sealing of screws and nuts, avoid loosening caused by vibration, and prevent screws from rusting and leaking. Used Widely: The threadlock is suitable for all threaded metal connections such as automotive electronics, home appliances, kitchen and bathroom appliances, furniture, etc. Your equipment can be repaired easily, preventing expensive and potentially harmful risks from loose nuts. Locktight Threadlock: Medium strength for locking and sealing of threads below M20. Protects from leaks, rusting, and corrosion and eliminates need to stock up on expensive lock nuts and washers. Threads above Dn65 need to be coated on both sides to isolate the air, otherwise the threadlocker may not cure. Use Steps: 1.Keep the surface clean, 2. Apply enough thread locker to the end of the screw, 3.After applying, tighten the nut to the locking agent position in 3 minutes, wait for 20 minutes for the initial curing, and 24 hours for complete curing. Note: 1. Do not mix with metal, oil and dirt. Half-Bottle Package: Thread lock is anaerobic, so the bottle can not be filled, it need to leave half of the space, to avoid the threadlocker curing and affecting the use. There is enough 50ml of threadlocker in the bottle. The upgraded thread locker bottle is easy to press and won't make your hands tired.