White Sew On Hook and Loop Tape Set with Non Adhesive Back Nylon Fabric Fastenerp 3cm 2m

Prices from
4.51

Sponsored links

Description

Amazon The set contains 2 m of hook tape and 2 m of matching loop tape, both 30 mm wide and white. Sew one strip to each side of an opening for 2 m of finished fastening. For shorter closures, cut the two strips into equal lengths so each hook section has a matching loop section. The hook face feels rougher to the touch, while the loop face is soft. On a cuff, flap or removable cover, put the loop strip on the side that may brush against skin or snag nearby fabric when open. Press the two faces together along their length to close. The nylon tape has a plain back for stitching directly to fabric. Lay each strip with its fastening face out and hold it in position with clips or pins. Stitch around the edges, keeping the opening clear so the two sides can still be peeled apart. Allow 30 mm of clear fabric on each side of the opening. The strip fits pocket flaps and fabric tabs. Measure the flap where it actually overlaps the pocket, allowing for any seams, so the hooks stay covered when the flap closes. For two different closures, measure each opening separately before dividing the tape. Mark the ends with each flap closed, then cut a matching hook and loop piece for each mark. This lets you use a longer section on one opening and a shorter tab on the other.

Compare webshops (1)

Sponsored links · Some shops pay us a fee

Sort by:

£ 4.51

Description (1)

The set contains 2 m of hook tape and 2 m of matching loop tape, both 30 mm wide and white. Sew one strip to each side of an opening for 2 m of finished fastening. For shorter closures, cut the two strips into equal lengths so each hook section has a matching loop section. The hook face feels rougher to the touch, while the loop face is soft. On a cuff, flap or removable cover, put the loop strip on the side that may brush against skin or snag nearby fabric when open. Press the two faces together along their length to close. The nylon tape has a plain back for stitching directly to fabric. Lay each strip with its fastening face out and hold it in position with clips or pins. Stitch around the edges, keeping the opening clear so the two sides can still be peeled apart. Allow 30 mm of clear fabric on each side of the opening. The strip fits pocket flaps and fabric tabs. Measure the flap where it actually overlaps the pocket, allowing for any seams, so the hooks stay covered when the flap closes. For two different closures, measure each opening separately before dividing the tape. Mark the ends with each flap closed, then cut a matching hook and loop piece for each mark. This lets you use a longer section on one opening and a shorter tab on the other.


Product specifications

Brand On1shelf
EAN
  • 5056328407880
Color
  • White

Featured Choice
£ 4.51
To Shop