YURROAD HTV Vinyl Iron On 40" x 12"Green Heat Transfer for Fabric T Shirts

【 40" x 12" IRON ON VINYL】- HTV heat transfe vinyl, with 12"/30cm wide, suitable for most vinyl craft cutters, and 40"/100cm length for your creative needs to DIY logos, patterns, letters or other design iron on fabric. In total 16 colours - heat transfer vinyl white/black/yellow/red/green/blue/pink/brown/rose/sliver gray/light gray/orange/sky blue/lake blue/gold/purple, you can create your own style by matching dIfferent colours of HTV vinyl. 【OUTLASTS MORE THAN 50 WASHES】- Our heat transfer vinyl are very sticky and have excellent elasticity, it can be repeated washing, even after 50 or more washes. Waitting 24 hours before the first TIME wash, your designs will keep the same color, no fade, no peel and no crack. 【CUTTING FROM COLOURED VINYL SURFACE】- Please *NOTE when cutting out patterns, must be cut from colored vinyl sheet (without clear protective film). And when you weed out the extra part, if the blade is dull, it needs to be replaced. FOLLOW the instructions, the heat transfer vinyl will EASY TO CUT & WEED!!! If you're green hand, please cut a small piece of HTV vinyl to practise more time. 【TEMPERATURE, PRESSURE & TIME REQUIREMENTS】- Heat transfer HTV vinyl to target surface, apply pressure≥ 3KG/6.61lbs at 300°F-320°F(150°C- 160°C) for 10-15 seconds. When you're using vinyl iron on fabrics, please note that different temperatures and pressures are used for different fabrics. 【COLD PEELING AFTER 45 SECONDS】- When the HTV vinyl iron on clothing is complete, please wait 45 seconds for it to cool before peeling off the clear protective film. And wait for 24 hours before the first wash, do not dry clean, do not bleach, do not wash in hot water. If you have any problems in the process of heat transfer vinyl, please feel free to contact us!