GEDORE Red Tool Set in Foam Modules 81 Pieces
Description
Zoro Tools
suitable for tool trolley MECHANIC 2046.10 / 2046.20 Coupler in acc. with DIN 3120, ISO 1174, with ball locking device Square drive as per DIN 3120, ISO 1174, with ball retention groove 2C reversible ratchet 1/2": To DIN 3120 - A 12.5, ISO 1174, lever for right and left-hand operation, push button release, fine-toothed, oval form, 2-component-handle Socket extension 1/2" Sliding T bar 1/2", with slide, to DIN 3122, ISO 3315 Universal joint 1/2": Joint bolted on, design to DIN 3123 - C 12.5 Chrome-vanadium steel, matt satin chrome-plated Square drive as per DIN 3120, ISO 1174, with ball retention groove Socket, hex: Metric, short, to DIN 3124, ISO 272 Screwdriver bit socket 1/2" for in-hex screws: Pressed-in, phosphated pin Chrome-vanadium steel, matt satin chrome-plated For hand-operated screw work Combination spanner: To DIN 3113, Form A ISO 3318, ISO 7738, ring side angled 15 jaw position, surface matt satin, plate-chromed Hexagon socket key set: To DIN ISO 2936, hardened throughout, phosphated Chrome-vanadium steel Water pump pliers: To DIN 8976 Form C, lengthways-serrated gripping surfaces, box joint, 7 settings, chrome vanadium steel, powder-coated Combination pliers: To DIN ISO 5746, inductively hardened cutting edges, 2-component-handle, forged Bent nose telephone pliers: To DIN ISO 5745, straight gripping surfaces, lengthways-serrated, inductively hardened cutting edges, 2-component-handle, forged Side cutters: To DIN ISO 5749, slender head, inductively hardened, long cutting edges, 2-component-handle, forged Engineers hammer: Forged hammer head of tempered steel, inductively hardened striking surfaces, to DIN 1041, ash handle, paint-coated shaft end, ring wedge Flat cold chisel, flat oval: To DIN, cutting edge and head ground, impact end tempered, chrome-vanadium steel Cross-cut chisel, flat oval: To DIN 6451, cutting edge, sides and head ground, impact end tempered, chrome-vanadium steel Hexagonal punch: To DIN 6458, impact end annealed, chrome-vanadium steel Centre punch, hexagonal: To DIN 7250, impact end annealed, chrome-vanadium steel Pin punch, octagonal: To DIN 6450, impact end annealed, chrome-vanadium steel 2C screwdriver slotted and PH: To DIN, high-grade chrome-molybdenum steel blade, chrome-plated, phosphated driven tip, 2-component-handle, 5-edge grip head, elongated hole in handle 2C screwdriver TX: Chrome-molybdenum steel blade, chrome-plated, phosphated driven tip, 2-component-handle, 5-edge grip head, elongated hole in handle Utility knife: Blade 25 mm, synthetic housing, metal blade guide, one-handed operation, 5 spare blades
Description
(2)
suitable for tool trolley MECHANIC 2046.10 / 2046.20 Coupler in acc. with DIN 3120, ISO 1174, with ball locking device Square drive as per DIN 3120, ISO 1174, with ball retention groove 2C reversible ratchet 1/2": To DIN 3120 - A 12.5, ISO 1174, lever for right and left-hand operation, push button release, fine-toothed, oval form, 2-component-handle Socket extension 1/2" Sliding T bar 1/2", with slide, to DIN 3122, ISO 3315 Universal joint 1/2": Joint bolted on, design to DIN 3123 - C 12.5 Chrome-vanadium steel, matt satin chrome-plated Square drive as per DIN 3120, ISO 1174, with ball retention groove Socket, hex: Metric, short, to DIN 3124, ISO 272 Screwdriver bit socket 1/2" for in-hex screws: Pressed-in, phosphated pin Chrome-vanadium steel, matt satin chrome-plated For hand-operated screw work Combination spanner: To DIN 3113, Form A ISO 3318, ISO 7738, ring side angled 15 jaw position, surface matt satin, plate-chromed Hexagon socket key set: To DIN ISO 2936, hardened throughout, phosphated Chrome-vanadium steel Water pump pliers: To DIN 8976 Form C, lengthways-serrated gripping surfaces, box joint, 7 settings, chrome vanadium steel, powder-coated Combination pliers: To DIN ISO 5746, inductively hardened cutting edges, 2-component-handle, forged Bent nose telephone pliers: To DIN ISO 5745, straight gripping surfaces, lengthways-serrated, inductively hardened cutting edges, 2-component-handle, forged Side cutters: To DIN ISO 5749, slender head, inductively hardened, long cutting edges, 2-component-handle, forged Engineers hammer: Forged hammer head of tempered steel, inductively hardened striking surfaces, to DIN 1041, ash handle, paint-coated shaft end, ring wedge Flat cold chisel, flat oval: To DIN, cutting edge and head ground, impact end tempered, chrome-vanadium steel Cross-cut chisel, flat oval: To DIN 6451, cutting edge, sides and head ground, impact end tempered, chrome-vanadium steel Hexagonal punch: To DIN 6458, impact end annealed, chrome-vanadium steel Centre punch, hexagonal: To DIN 7250, impact end annealed, chrome-vanadium steel Pin punch, octagonal: To DIN 6450, impact end annealed, chrome-vanadium steel 2C screwdriver slotted and PH: To DIN, high-grade chrome-molybdenum steel blade, chrome-plated, phosphated driven tip, 2-component-handle, 5-edge grip head, elongated hole in handle 2C screwdriver TX: Chrome-molybdenum steel blade, chrome-plated, phosphated driven tip, 2-component-handle, 5-edge grip head, elongated hole in handle Utility knife: Blade 25 mm, synthetic housing, metal blade guide, one-handed operation, 5 spare blades
AmazonSquare connection according to DIN 3120, ISO 1174, with ball lock Square drive according to DIN 3120, ISO 1174, with ball groove 2K reversible ratchet 1/2 inch: according to DIN 3120 - A 12.5, ISO 1174, clockwise / anti-clockwise rotation can be switched using the lever, push button release, fine-toothed, oval head, 2-component handle Socket extension 1/2 inch Cross handle 1/2 inch with sliding piece design according to DIN 3122, ISO 3315, Weight: 27.778245012 pounds, Manufacturer: GEDORE
Product specifications
Price History
Related products
To Shop
