Salamander Pumps CT55 Xtra Shower Pump 1.5 Bar Pressure Single End Suitable for Positive Head, Gravity Fed Systems Only, Quiet and Compact WRAS Approved

Plumbworld

Additional information:CT Xtra pumps are only suitable for positive head, gravity fed systems. Installing a CT Xtra pump in a negative head system will mean the pump may not work. Shower Individual Outlet Pump Type Positive @@@K/5f3xaZvLi2fudlbibPSzSE4Diq7etP@@@ Single Hot Or ColdCT55 Xtra will boost water pressure to either a hot or cold individual tap. Toilet Wash Basin With homes getting more technologically advanced consumers are finding that appliances are requiring higher pressures in order to operate. This could potentially cause you a problem if you have lower water pressure. A solution to this problem could be a Salamander shower pump. They are designed to boost pressure in both the hot and cold water supplies to thermostatic or manual mixer valves. They are also suitable for use with a large range of shower types and accessories such as heads. Positive Head Positive head shower pumps are for gravity-fed systems only. As a rule, if your cold-water tank is above the shower (maybe you have a shower in a converted room downstairs) and you have a flow rate as little as 0.5 bar, then you will need a positive head shower pump. Single Impeller Shower Pump Single Impeller Shower Pump is designed to help improve your hot or cold water supply to a tap or to pump mixed water from a shower mixer. This pump will help maximise the pressure of your water to make the flow of your tap of shower more powerful. Powerful noise reducing technology It’s no surprise that shower pumps can be on the noisy side considering the job that they do. That being said, they don’t have to be, providing they’re designed with noise reduction in mind. Salamander pumps are exactly that, featuring noise and vibration reducing feet which work in perfect sync with the natural vibration of the motor. Also, the materials used within the pump are capable of dampening the vibration of rotating parts, reducing noise further. Solid state switching Solid State Switching is the activation system used within Salamander shower pumps. Where other pumps rely upon moving parts within them to activate, the new solid state switching from Salamander uses an electronically operated switch with no moving parts, thus improving the reliability, the sensitivity, and the overall product life. Compact size Salamander are champions when it comes to producing small yet powerful shower pumps. This is not only great for an installer but you too, allowing you to fit and operate it in smaller than normal areas. Size really does matter when it comes to shower pumps and flexible installations. Silent ShoweringQuiet Mark approved means when the water is running you won't hear the pump operating - making it perfect for early morning and late night shower users! Continuously Rated Motor Continuously rated shower pumps effectively run until the user turns it off. This is particularly good in a family home where the shower needs to be used frequently throughout the morning or evening. A pump that isn’t continuously rated will turn itself off to allow the pump to cool, potentially causing issues with water pressure to the shower. 3-Year GuaranteeWhen buying anything for your home you need to know that it's going to stand the test of time. This is why this product comes with a fantastic 3-year guarantee against any manufacturing defects should the worst happen and the product is not up to standard. Flexible hoses included This shower pump comes complete with 2 x 15mm Straight Pushfit Couplers (with Isolating Valve), which are used to link your shower pump to both incoming and outgoing water pipes. These hoses lmit the transfer of vibration from the motor and pump to the associated pipe work, helping to reduce noise and prevent damage to the pump itself. WRAS Approved for qualityIf you’re buying any sort of water fitting or product then it’s important that its WRAS (Water Regulations Advisory Scheme) approved. It’s the best way to work out if that particular product or part complies with the UK requirements for installation within the UK.

National Shower Spares

Salamander CT55 Xtra 1.5 Bar Single Impeller Positive Shower Pump. The Salamander CT Xtra shower pumps are the UK's best-selling range. They are one of the quietest pumps on the market and are great value for money. Maximum pressure rating (closed head) 1.5 bar. Pressure rating (8 litres/minute) 1.4 bar. Suitable for positive head installations only. Absolute minimum head 600mm. For gravity fed water systems only. Single impeller for boosting one water supply (either cold, hot, or mixed). Continuously rated induction motor with even better efficiency. Regenerative impeller motor. 273watts Carbon seals. 15mm push-fit flexi connectors. Supplied with AV couplers. Compact size 165mm x 120mm x 195mm (H x W x D). Weight 3.37kg. Noise and vibration reduction with very minimal background noise (as low as 63dB), including special anti-vibration feet. You can also purchase an anti-vibration pump mat as an optional extra. Ideal for boosting conventional or multi-function showers (single outlet use at a time). Salamander Motor Pump Integration technology: compact size, aids cooling, and longer life. Salamander Solid State Switching technology: reliable, consistent, and fast switch on. 3 year manufacturer's guarantee, which can be extended to 5 years with Salamander PumpWise registration. WRAS approved. Installation guide included. The Salamander CT Range does not necessarily need a flange, provided that the pump is installed at the base of the hot water cylinder, the cold-water tank is higher than 1.2m above the cylinder, and the pump is ‘teed’ off the first downward leg from the cylinder. If this is not the case, see the Salamander 22mm S-Flange. @aj9SkF9TeX0@ Genuine brand new Salamander product, covered by a Salamander manufacturer's guarantee.

ManoMano

The new Salamander CTXTR pump replaces the long standing CT55. This is still supplied with 15mm compression flexi hoses and boasts a quieter motor than the previous CT55 model. To boost tank-fed supplies to instantaneous electric showers, water heaters, washing machines and combination boilers - according to inlet pressure requirements. Through the application of technologies developed for Salamander s impressive new HomeBoost product, they have delivered a range of improved shower pumps, packed with performance and innovation identified by using the new Tech2ology inside logos and icons . The patented technologies used in the new CT Xtra and new CT FORCE ranges, are industry leading, and give both the consumer and installer excellent performance, and are easier to install Benefits of CT55 Xtra Noise/Vibration Reduction - noise 53dB A weighted emmision sound pressure at 1m Solid State Switching - reliable, consistant, fast switch on Motor Pump Integration - compact size, aids cooling,

Zoro Tools

CT55 Xtra is a 1.5 bar pressure, single ended, positive pump. Suitable for boosting either the hot OR cold water pressure to an individual hot or cold tap, the CT55 Xtra is a hard-working, affordable pump. CT Xtra pumps are only suitable for positive head, gravity fed systems. Installing a CT Xtra pump in a negative head system will mean the pump may not work.