Victron Energy Cyrix Li Charge 12/24 Volt 120 amp Intelligent Relay

Victron Energy Cyrix-Li-Charge will connect a battery charger with 3 seconds delay. Victron Energy Cyrix-Li-Charge will disengage immediately whenever its control input becomes free floating, signalling cell over voltage or cell over temperature In general, a cell over voltage alarm will reset shortly after charging has been stopped. Victron Energy Cyrix will then reconnect the charger after a delay 3 seconds When Victron Energy Cyrix-Li-Charge is engaged (charger connected to battery) it will disengage after 1 hour to check if the charger is still enabled If, after the Victron Energy Cyrix has disengaged, the output of the battery charger immediately increases to 13 V or more, Victron Energy Cyrix will reengage, with a 3 seconds delay Note: In case of zero discharge current, or a small discharge current, Victron Energy Cyrix will not disengage shortly after the charger has been switched off and/or disconnected, because battery voltage will remain higher than 13.5 V